







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose Toto Construction
Mason Remodeling Mesquite provides independent Toto construction, installation and repair service in Mesquite, NV. We work on Ultramax II and Drake II toilets, Washlet bidet seats and Neorest models, and we integrate those fixtures into full bathroom remodels and walk-in shower projects. What sets our Toto work apart is the part-level side of it: fill valves, control boards, water filters and supply connections, sourced correctly and fitted so they hold. We are an independent Toto service provider. We are not affiliated with, sponsored by or authorized by Toto, and we don’t imply otherwise. Call (844) 797-3609 to schedule a free estimate.
Why Trust Mason Remodeling Mesquite for Your Toto Construction?

Our technicians have up to 22 years of experience, and a good share of that has been spent with Toto fixtures specifically. Toto builds its toilets and Washlets to tighter tolerances than most of the market. That means the fill valve has to be the right one, the supply pressure has to be right, and the seat has to sit level on a toilet that actually is level. Get any of that wrong and you get a running toilet or a Washlet that cycles off. We know the difference between a Drake II fill valve that’s worn and one that’s been installed with debris in the line.
We use OEM Toto parts for critical components: fill valves, flush valves and Washlet electronics. Fit and reliability matter more there than the few dollars saved. For parts that don’t touch the electronics or the flush path, we’ll use a quality aftermarket equivalent when it meets or exceeds what Toto specified.
Our work is warranty-safe. We don’t cut, drill or seal in a way that voids a manufacturer’s coverage, and we’ll tell you plainly what’s still under Toto’s warranty and what isn’t before we touch it. The Threshold Standard applies here as it does on every job: every technician is background-checked and identity-verified, and you get their name and photo before the visit. At the door they show a photo ID badge in a clean marked uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Mesquite
These are the Toto problems we see most in Mesquite homes, and what actually causes them.
- Washlet control failures and dead seats. The bidet function stops, the seat won’t power on, or it powers off mid-cycle. It’s usually a failed control board or a clogged water filter, and in Mesquite’s hard water the filter clogs faster than owners expect. A technician checks the power supply and water inlet first, then replaces the board or cleans the filter, which restores function without replacing the whole unit.
- Running or weak flush on Ultramax II and Drake II. A toilet that runs constantly is almost always a worn fill valve or a flush valve seal that no longer seats. Weak flush in the same models often means mineral buildup in the rim jets. Both are wear items, both are fixable, and neither requires a new toilet.
- Washlet water supply leaks and filter clogs. The connection between the supply line and the Washlet inlet is a small fitting under constant pressure. A loose compression nut or a hardened washer will weep quietly for months. On a slab-on-grade home here, that moisture goes into the floor before you ever see it.
- Bowl cracks and leaks at the base. A leak at the base gets blamed on the wax ring, but on improperly set toilets it’s often a hairline crack in the bowl or a flange that was never seated right to begin with. Home movement makes it worse. Cracked bowls can’t be repaired safely.
- Neorest electronic faults and seat sensor issues. Neorest models carry more electronics than a standard Washlet, including auto-flush and lid sensors. When one of those systems faults, the cause is usually a control board or a sensor, not the whole unit.
Toto Parts & Our Repair-vs-Replace Approach

We source Toto parts per job rather than stocking them. That means the fill valve in your Ultramax II is ordered to match your exact model, not pulled off a shelf and made to fit. We’ll tell you when an OEM part is the right call and when an aftermarket part is genuinely equivalent.
Our repair-versus-replace advice is honest because we have no reason to push you either way. For most Toto toilets, repair is the right call. A 10-year-old Drake II with a worn fill valve has another 15 years in it. We recommend replacement only when the bowl or tank is cracked, or when the model is obsolete and parts are no longer made. A cracked bowl is a leak and a safety problem, and no repair is going to hold it.
Call (844) 797-3609 and we’ll give you a written price before any work starts.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start with the symptom, not the part. A Washlet that shuts off could be power, filter or board, so we test the supply and the inlet before we order anything. On a running toilet we check the fill valve, the flapper or flush seal and the water level against your specific model’s spec.
- 2
Repair or install. We confirm the model number before parts go in. On a remodel, we set the toilet and the supply rough-in to Toto’s dimensions so the Washlet seat clears the tank and the supply line reaches without strain. That’s where a lot of bad installs go wrong.
- 3
Test. Full flush cycle, Washlet through every function, and a leak check at the supply connection and the base. We watch it run, not just start.
- 4
Written guarantee. Every completed project is covered by a written guarantee with the terms stated plainly: what’s covered, what’s excluded, and for how long. It’s 365 days from the completion date. If a repair or installation fails inside that window, we come back at no charge.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Mesquite
We service and install the Toto lines Mesquite owners actually own. That includes the Ultramax II and Drake II one-piece and two-piece toilets, the Washlet bidet seat family, and Neorest integrated models. On the remodel side, we set Toto fixtures into full bathroom remodels, walk-in shower installations and tub-to-shower conversions, so the toilet, the seat and the shower all work together. We don’t claim to stock these products. We order what your job needs and install it to spec, with the rough-in and supply sized for the fixture going in.
We Also Service These Brands
Toto is one line we know well, not the only one. Mason Remodeling Mesquite also works with KraftMaid cabinetry, Kohler fixtures, and Cambria and Silestone surfaces, so a bathroom remodel can pull the toilet, the vanity and the countertop from one coordinated plan instead of three separate ones. If your project mixes brands, we handle the whole thing.
FAQs – Toto Construction Service in Mesquite

A Toto Washlet that keeps shutting off is usually dealing with a failed control board or a clogged water filter. In Mesquite’s hard water, the filter clogs faster, and a restricted inlet can trip the unit’s safety shutoff. A technician checks the power supply and water inlet first, then replaces the control board or cleans the filter to restore full function. Call (844) 797-3609 for a free estimate.
A constantly running Toto toilet is almost always a worn fill valve or a flush valve seal that no longer seats. On Ultramax II and Drake II models it’s usually the fill valve, and it’s a straightforward replacement. We use OEM Toto parts here because the fit matters. Call (844) 797-3609 and we’ll quote it in writing before any work starts.
Yes. A Toto Washlet can be installed on most existing Toto toilets, and on many other brands, as long as the bowl shape and the water supply are compatible. The two things that matter are the seat mounting and whether the supply connection can reach without strain. We check both before we install. Call (844) 797-3609 to schedule an estimate.
A well-installed Toto toilet typically lasts 15 to 20 years or more before it needs replacing, and most of what fails in that time is a wear part like the fill valve or flush seal. We advise repair over replacement unless the bowl or tank is cracked or the model is obsolete. Call (844) 797-3609 and we’ll tell you honestly which one you’re looking at.
In most cases, installing a Toto Washlet on an existing toilet does not require a permit in Mesquite, because it’s a fixture swap on an existing supply. If your project involves moving the supply line, adding an outlet or a full bathroom remodel, permits can come into play. We’ll tell you what applies to your job before work starts. Call (844) 797-3609 for a free estimate.
Most Toto projects in Mesquite fall into the ranges below. These are typical market prices for the fixture and the work around it, and you’ll get a written price for your exact job before anything starts.
| Project | Typical Range in Mesquite |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 797-3609 for an exact quote. Estimates are free.
Book Your Toto Service in Mesquite, NV
If your Toto Washlet has quit, your Drake II runs all night, or you’re planning a bathroom remodel around a Toto fixture, call Mason Remodeling Mesquite at (844) 797-3609. You’ll get a written price before any work begins, and a live person answers the phone every time. Schedule your free estimate today.
Written by the team at Mason Remodeling Mesquite.












